Separate names with a comma.
It's a USA thing: laws changed a few years ago allowing states to require online vendors to charge sales tax. In fact, Colorado adds one more...
This is the REAR solid-axle support bushing. NOT a front control arm. ;)
OEM: $118 each list price plus tax, $236+tax OEM discounted for 2: $156 + $10 shipping + tax, $166+tax RockAuto MevoTech (lifetime warranty not...
The OEM part for the Gen3 Prius rear axle support bushing is 48725-47030 I find no alternative for that named part... but quite a few for that...
Yep... found a repair summary for 2010, presumably similar to 2011. It says the bushings are not reusable. Preparing for this... I have questions...
Up on the lift... he can see: right side only, definite bend. New axle needed. I did another search for parts.... A bunch of Chinese sources...
Here's some info on new tools I suspect may be VERY handy for grid charging/discharging... and individual module analysis as well: 1)...
@Tombukt2 I think it's mostly for avoiding scraping noises / squeals
Thanks! So someone messed up and didn't put them on my rear brakes. I think I'll check the front and see if they are up front by accident ;)
Quick question: You mentioned the little spring clips that hold the ears of the pads. Mine has those. What I don't have is the V shaped springs...
Yes @Mendel Leisk -- I would appreciate that VERY much. He was just looking from behind, no lift. Here's my best photo of right and left side.......
Banged against a curb a year ago. Primary damage was to right-front wheel ('twas dented a bit so I replaced it. Replaced hub and ties. Rear wheel...
That was my first thought... but as my mechanic friends pointed out, ensuring it's truly undamaged is not easy. And for only a couple hundred...
Well... Sensing that I need to take this to an expert, I found a well-liked car place in town whose owner loves a high end welding shop, also in...
The new hubs are wonderful: MUCH quieter ride. The calculated caliper shim washers also perfect. Rotors are centered even though shimmed....
Valid archived link Wayback Machine
Just found a long ago post here with a version of the same method. Solved, rear wheel bearing removal, easy way | PriusChat
I used bolts on my '11 Gen3. Works great. Do this BEFORE hammering... and do it gently (@ChapmanF gives an appropriate warning above.)
Oops! RockAuto is my fave non-OEM source. They don't sell fake parts. I went for MOOG, same as I used in front... Much cleaner assembly with...
OK, time to go for reassembly, based on what I've learned: Being MUCH more careful to clean surfaces involved in mounting. There was quite a lot...
