Separate names with a comma.
Apologies. I am calculating MPG by dividing the number of miles driven by the number of gallons of fuel added during each fill up— although my MPG...
I surely will. I am not one to gatekeep knowledge in any realm, but certainly not this one. I think I’m going to have to bite the bullet, and go...
Everything was done to spec, and tested. I genuinely think I remember a software update coming along with this manifold swap. The last thing I...
Like the title says, the MPG won’t get above 40MPG after doing the swap from 17120-37050 to 17120-37054. I have heard tale of a secret, ancient...
Fighting low MPG in my 2010 Prius III after swapping out the stock intake manifold with the newest revision. (054)
My understanding of the tint that is currently available on eBay is that it is all misrepresented, and I’m inclined to believe it. Several of the...
I am looking to tint my trusty 2010, but it seems that you can’t just outright purchase rolls of name-brand tint very easily. 3M, Llumar… they all...
If your cycle reaches a CAPA or charging capacity, it will stop with that cycle. What I do is set the charge capacity to 8,000mAh and just run...
Was there ever a resolution here for OP? I’m having a somewhat similar issue and would like a place to start. I have a mini-VCI and TechStream, as...
This is an old post, but I would really like to resurrect it, and see everyone’s creative layouts. Here is mine so far… Torque Pro Layout 1 by...
My current layout for the Torque Pro app.
I have a 2010 Prius III with Solar Moonroof and JBL/NAV. It was at 190,000 when I did this. I have learned a LOT since making this post, though....
I just woke up to this after a heavy rain, for the first time ever in my 2010. The spare tire well had about a pint of water in the bottom. I...
I had a weak block #8, and sure enough, modules 15 & 16 were giving around 800-1000mAh discharges, even on 10+ cycles. However… I also had about...
New member here! I just finished much of this process, and just wanted to thank everyone here for their helpful information! It was so comforting...
My understanding is that, in this case, it’s mV/module. I’ve had the best luck with using 1.2A-1.5A discharge to 5.8V. Keep in mind that there...
