Separate names with a comma.
So I drove with no actuator pump- front brakes only ...for about 15 miles. A little dicey.....just took me longer to stop. As I drove, I sort of...
Re replacement pump: These tend to go bad on gen 2, so I have no interest in replacing with used and rolling dice. For one- a bit labor...
This is all good info. So....you are right. I did drive it to the mechanic....and ..braking distances increased dramatically. A bit dodgy for...
reading up....I see actuator pump failure is in the top 5 "issues" with gen 2 prius. Since I only have 140K, I'll go ahead and have it taken care...
Ok, understood ($-ouch). (my "like" was of course, qualified) Frigid NE w/o a garage...no position to tackle this. ....and it looks like driving...
few weeks back, when I began driving (2004 prius) ABS, exclamation point, and brake light suddenly came on along with whining buzzer. Brakes...
So my plans are to attach a 'stowaway 2' swing out hitch cargo box. (1-1/4" hitch attach) The tongue wt on my curt hitch bracket is 300 lbs. The...
So....got some definitive weld info for Gen 2s...... Like Ed said: disconnect the 12v, then pull the orange safety plug on traction battery....
How /where does one re-gas gas struts? Mine are certainly weak. They start lifting only after hatch is half way open. See no sign of...
That would be ideal. Reinforcing the plastic voids under the two central bolts (most crucial) would really be ideal. Don't know what Toyota was...
For a while, the 'hood' you grab to lift back hatch dangerously bowed out threatening to snap off. I'd have to pop it open a crack, then lift by...
its not going to sea although it looks like it has. Jeez Ed, good thing I'm not sensitive about my prius' feelings. :LOL: Ok....so I think...
ya.....easy enough.....it's the disconnect computer part that worries me....... I may just fabricate the 3/16 plate steel patch, then try to have...
1) Foam: so, I had that notorious slight hairline fracture up near where both sides of hatch meet roof- . For years water pooled in both the 12 v...
question: at 2:27 into this video, the installers left hand knuckles are almost touching a small black cube attached to the frame....any idea...
ok, three pics of the carnage. Pic#1, seems ok, surface rust, bolt holes have depth- drill them out- rethread -use next size bolt- no problem....
"off the top of (one's) head" Meaning:- from memory, or without much or careful consideration. Reasonable request - if a filter was being...
anyone know the size of gen2 cabin filters off the top of their head? :)
So I took the car to a Toyota certified body shop. The guy crawled under the car and said that I merely had to drill slightly larger holes-then...
