Separate names with a comma.
It is possible to fill a cooling system with a funnel that does not seal at the inlet. Patience. Many "content creators" assume techniques used...
Agree to disagree
These hybrids have to have their engine rpm perfectly match the motor generator's speed control of the planetary gears or else you have severe...
A vacuum fill system is relatively easy and reliable.
For a 5 minute read, the referenced article is significantly on point. Toyota's big win was the ecvt transaxle with almost zero reliability...
Have to admit you are more honest than most around here that blow it big time. Spilled coolant was mistaken for a water pump leak which lead to...
The mechanic probably has a deal with Autozone where he gets a labor and parts warranty if it fails right away. He then gets paid by them to do...
First, aftermarket for Toyota water pumps is a bad idea. Not necessarily for leaks (rare in any case) but for long term reliability....
Six posts for the price of one. We are back to the good ole double and more posting Priuschat tricks. If you are running on 3 cylinders you...
The video above shows the technique
That is what this guy does around 20:00 and then removes it around 33:00 to avoid a tooth jump on the crank. He also goes over the sealant...
It will code and energize dash lights if the pump fails to achieve pressure.
Normally all the slack should be on the left side where the tensioner will be released. The opposite side should be reasonably tight to ensure the...
Hydraulic brakes are always used from approximately 7 mph to 0 mph, however regen provides impressive braking at speed. Enough to surprise the...
Somebody like Mendel who is on here all the time should create a list, put it on google drive and share the link. You want more than shops who do...
Agree, likely a basic engine problem. Often throttle body needing cleaning, maf sensor cleaning, plugs, injectors or coils. Other issues can be...
Yes, Toyota wants a charger on while doing the setup. Let us know how the Foxwell does. Lots of people have trouble on this part.
Showing him it has a chassis connection that is just as important as the positive terminal or fuse. Yes, I changed my ground cable once.
How did the set up process go? What scanner did you use?
