Separate names with a comma.
Yes, the same on cylindrical replacements AFAIK
Yes that's what I'm referring to, the thermistors in the cylindrical replacements also clip to the modules like the OEM prismatics. That's where i...
I mean, the temp sensors are attached to the modules, not the exhaust of the HV pack, no? I honestly don't know. I know the ones that...
Well, from what I've seen talking to people with the cylindrical replacements, temps are significantly lower. I have a friend using them in the...
Yes that's rather unfortunate. I wonder why, subpar supplier issue? I see no reason on paper it wouldn't work/be a bad idea, but it's obvious...
It probably wouldn't be as bad if it used the cylindrical cells like newpriusbatteries where there's an air gap between each module which should...
Maverick Hybrid also has its pack looped into the cooling system. Pretty neat setup, I haven't seen any vids on it, but dropping a pack looks like...
I agree, I also find it to be a bit conservative in how high of a temp it'll let it hit before turning on. Obviously using Dr Prius or Hybrid...
What's the logic on how the vehicle determines the HV fan speed? Does it spin up based on the peak reported temp from 1 sensor? Or does it go by...
I have an update: Finally got around to replacing the MAF, no change. Bought an upstream O2 sensor, installed it, and have been driving it back...
Out getting more data while I await a new MAF and O2 sensor in the mail. The high upstream O2 voltage isn't a fluke. This screenshot is with the...
As an update: I've been driving the car back and forth on my ~20ish mile "test loop" for the past couple of days, monitoring things. My MPG has...
I would personally ignore the downstream sensor data, It's probably not accurate whatsoever. The car has had a P0420 & P0037 & P0138 for a while,...
I was finally able to go out for a drive and get some data. 0.09g/s engine off 6.8-7.8g/s 1300rpm cold idle 5.85-6.0g/s @2500rpm cold 16.6g/s...
Just to add to this: 0.5qt/2500mi is actually pretty low for a Gen 2, especially one with 150k+ mi. Usually when people do a piston soak (and...
I will go out for a drive this evening and try and get freeze frame data. MAF inconsistencies are a possibility I was considering.... The sensor...
The coil connector definitely isn't ideal, but as long as it's fully seated in there, it should be making contact. Even worst case scenario it...
To me they look fine, just a little worn. Yeah I'd start with disconnecting the 12v for like 15 minutes... Like I said, they can act strange...
I'd highly recommend getting yourself a cheap bluetooth ELM327 OBD2 reader if you have an android phone (or an old android phone/tablet sitting in...
Figured I'd post this in a separate thread w/ a more apt title. A few weeks ago, my Gen 2 was suffering from a P0A0F and a P3190. After cleaning...
