Separate names with a comma.
Ah, now all is clear...thanks, there is always something to learn...
Since the original fob is not a SKS and the replacement isn't either...I'm not sure where this is going...once I found the chip, all is well and...
Thank you all for your patience. RFID chip is now in the new fob and all is well...
but why did it work that day before???
I didn't see any thing that looked like that chip in the old or new case. The only thing was the small, printed circuit board, that I transferred...
I went out and dug through the garbage can to find the old mangled fob case...put the guts back into in and voila..the car started normally. So,...
I used a new empty case and it started the car several times the previous day. I have removed the 3V battery from the case and tried the...
tell me where the rfid chip would have been. I've moved several Prius innards to new cases with no issues... and the timing was moved fob innards...
This is not a SKS fob. I did replace the outer case and put in a new battery even though the battery in it was still good. Car worked with new...
Since I only have one fob for this recently acquired '07, yup it's the right one and it worked 3 days ago just fine. I only had the problem after...
flashing continues after fob is inserted. Fob locks into slot properly.
Car ran fine the night before and now won't respond to the fob except for the door locks...
I have an '07 Prius without a smart key fob. I understand that is fairly rare. Yesterday I inadvertently put the smart fob from my '04 into the...
I really don't mind having a new pedal...less to go wrong over the next 20 years..
It was the PO122 code and the symptoms that prompted his recommendation.
When I get over the sore ribs from leaning over the sill...I'll tackle opening up the hybrid battery area and check out the modules for values and...
I've replaced the throttle pedal assembly on the advice of a factory trained Prius repairperson...Today I installed the new throttle body and...
I'm about to replace the throttle body and the throttle pedal assembly. I'm hoping there are no re-learn issues but what can I expect? I've done...
Ran Dr. Prius again...much the same...all module charge bars were up even except #14 seemed down a bit. I charged it awhile in "D" and all came up...
I'd think that if something was unplugged, the car wouldn't run...Since I only unplugged the two pumps and they now both work fine...I don't know...
