Separate names with a comma.
On a side note, I did see a huge improvement in the car’s performance after the busbar/nuts replacement, it is much smoother and battery charge...
Hence why I mentioned you chiming in on that in post #109 and was looking at the way the other 2 members would approach this themselves. The...
Soooo, since @ChapmanF @ASRDogman and possibly @Brian1954 are mainly the ones responding to this thread…I have the very simple question for YOU 3...
Yeah, everywhere I have read, it is unanimous that P0A80 “cannot” be cleared with any scanner even TechStream. The Confirmation Drive states to...
its permanent, you cant clear those with a scanner. At least aP0A80.
So far so good, battery appears to be charging a bit higher than normal and blocks are all reading very similar voltages from 16v-18v. Planning on...
All has been put back together and initial startup was normal and drive was great, felt more responsive but it was only a drive around the...
I installed the new busbars and checked for continuity from plug to each connector on the longer busbar plate and they all are getting good...
Thank you I really appreciate all the insight, I will look into getting that then. Do you know if I get the dicharge module later, can that be...
Yes it comes with a wiring harness and the charger. So you say 250 is a good price? What about the discharge process?
I will be doing the load test again after the new busbars and nuts are installed as mentioned above, once I drive the car for a day or 2. Thanks...
I did the voltage drop test using a the following video setup. I used a Philips 9006 Halogen bulb that appears to have a initial draw of 6 or 7...
I will look into that info. It would be cool to make my own grid charge/discharger. Is that info on Hybrid Automotive’s site? Will also continue...
Not sure where it was “clear” to me that the HV battery was repaired anywhere in the last 7 pages as nothing like that is mentioned. You may be...
Yes, its is obvious now that the battery pack is not its original battery pack and was swapped out for an OEM used pack and then 3 modules...
I am def going to look into the prolong and try to find a used one for a good price. Is the deluxe kit really needed though? The one that comes...
13, 14 and 15 from right to left are the ones with the complete different serial numbers and they appear to be in the center The 3 different...
I got the serial numbers. most of the cells have the first 9 alpha/digits the same and 3 are totally different numbers. Does that mean those have...
ill check
Agreed.
