Separate names with a comma.
Just read up on this and it may be because of the battery along with the Dtc codes I didn't clear I'll try again and update
Hey everyone I need a little help here, I'm running through the bleed process after changing the actuator and suspect there may be air in this bad...
I found a junker with the premium sound system I snagged the main speakers and am planning on going back for the tweeters, does anyone know if you...
Ball joint to steering knuckle (castle nut): 52 ft-lbs (70 N⋅m) Ball joint to lower control arm (3 fasteners): 66 ft-lbs (89 N⋅m)
Got it off with a cheater seat,
Helicoils and carbine burrs along with a jig saw blade would likely run me 100+. I opted for swapping out the crossmember from one at the junk...
Hi I'm not interested but appreciate you thinking of me. I got one with good threads and nice splines at the junk yard, so I'm rebuilding that...
Lower Control arm replacement. Trouble removing them. | PriusChat Read this entire thread and all the service manuals and I'm headed back outside...
I'm starting to wonder if they may have welded it on accident
My driver's side control arm is stuck like chuck and I'm struggling here. I've tried heat and penetrating oil but it's stubborn as hell. Any...
Thank you allot for this @Mendel Leisk
For future reference to anyone who may need this information later. You should use a lithium-based grease that is fortified with molybdenum for...
Yeah to me smaller diameter = weaker. My old shaft still looks good so I'm moving to rebuild and will go from there.
I took apart my old and new axle. My main question is why the new axle doesn't have the same range of motion, should I just use the old...
Updated measure before you do this, doesn't fit my new axle.. I hate it here
You for sure can take this off, just did here's what the non diagram looks like[ATTACH]
I know it's been awhile but do you happen to have a source on the Inner Tie Rod Torque Spec? I am doing mine now and can't find much on it :/
Not sure the best place for this but i'm super happy with the progress I have made, Here's a photo for anyone wondering what the Prius looks like...
For future reference these are serviceable. Here are some photos for the poor sap who runs into this next. Good Luck. Inner Tie Rod/Rack and...
