Separate names with a comma.
Attachments are working again! Check out this thread for more details and to report any other bugs.
On a related note, what would be the recommended PSI that would create the best balance between optimum MPG and longest tread life?
Yes, the plug is visible, and seemed to still be holding as I could not see bubbles forming using soap/water with full weight of car and at 40...
I had used an external plug about 6 months ago after finding a nail in the tread. The repair was successful and there wasn't an issue until just...
Sorry, I forgot to clarify. Yes, I inflate back to 42 psi before checking for leaks. I also checked the valve stem and it felt tight. But I went...
I'm a little bit baffled. I noticed my driver side front tire has been losing almost exactly 10 psi when I check it every morning. I've removed...
So, the bottom line is, brake pads will not last "forever". They just last longer than pads in cars without regen.
So, just to clarify, regen is fully engaged (no mechanical assistance) while braking, regardless of whether the charge indicator is fully filled...
Does regenerative braking only kick in when the charge light is a solid white?
The 2023 Prime reportedly gets about 40 miles on EV only from a full charge. So my question is, if you're driving on EV mode only, once the EV...
I fully disengaged the throttle body clamp to where it is visibly loose and rotates around freely, but the hose will not come off! Any suggestions...
I did a Google search for that Lexus part number, but that specific part didn't come up.
Will this fit a 2011 prius?
This might suffice.[ATTACH]
I cannot find that part anywhere, including ebay. Do you have a link?
No rodents, which is likely due to the steps I took over a year ago to screen off all entry points. And would you care to explain how covering up...
Prius is 2011. I'm concerned that rodents could get inside and damage or destroy this exposed wiring. I'm wondering why it is not covered in some...
is that like a solid Teflon or polyurethane block and how is it attached to the aluminum angle bar? Is it held on by a recessed bolt that I can't...
So I went ahead and made my own pinch weld adapter out of a piece of 2x4 which sits on top of a round piece of plywood that fits in the recessed...
Yes, some pics would be helpful, thanks.