Separate names with a comma.
Wheel bearings were replaced not that long ago; they are fine. Good suggestion though!
The worst (right rear) wheel still spun, so that says something. I don't think I have a solid answer to the pad wear pattern... As has been...
Back to the slow car weirdness. Good Questions, @VelvetFoot I may not be able to further diagnose w/o another cold snap, and have changed the...
Can't be the piston. One thought going back a few years... I drove a few thousand miles with the out of alignment rear axle. It was bad enough...
Correct about the wear. No, this is not the piston side.
Sure is hard to photograph! So: * notice the pad in back has a slot still, edge to edge. Pad is about 5mm thick, Slot 2mm. Now the pad in front...
I'm doing a complete 4 wheel rotors+pads replacement on our 2011+ 250k mile prius. Rear wheels now complete (rotors were at 7.8mm.) Physical...
Who makes the OEM parts? ;) -- looks like Akebono
I decided the brakes are close enough to replace. Got a good RockAuto deal on PowerStop z17 fully coated complete set (rotors, pads, front and...
Still wondering, could the vibration come from 0.1mm runout, or am I barking up the wrong tree?
I guess that fits the Maintenance topic. Will do :)
When I get some more Round Tuits, I still need to finish building my semi automated HV battery module tester/script. That will be fun! I also did...
Nope.... Not an issue. Would you consider 0.1mm runout basically close enough? It's not a horrible vibration. Just noticeable enough that I...
I just noticed that when braking on a very smooth road, I feel a rapid vibration, I think in the brake pedal. Been a couple of years since I...
Yeah, found that on my front sway bar bolts. Found a workaround, but a mechanic friend says he has sometime had to cut through 1/4 inch steel frame...
Right. But to install a 2016 engine in a Gen3 (normal) Prius is more than a little tricky.Two years in, I am appreciating the expertise and care...
It's a 2015 (final Gen 3 year) from Hybrid Pitstop. The first year they fully solved the piston/ring issues. But according to the diagrams even...
Good questions... I use Techstream for intense stuff, and keep an OBDlink LX installed while on the road, etc. OBDlink does seem somewhat smart,...
Ahhh!!! So it's the inverter-transaxle cooling system. :)
SOLVED IT! AND, I realized the confusion is most likely due to a strange anomaly I learned decades ago about some elements in Korean culture, that...
