Separate names with a comma.
I am in the process of discharging & charging my hybrid cells to determine which ones are bad. I have received the following message: FULL 0.0A....
Hi everyone, I was getting error code P3015 Battery block 5 becomes weak and was having a lot of electrical issues come up from it. So I have...
Hello! Please excuse anything I incorrectly say as I am a huge novice and had help throughout the process. I have been in the process of...
A seller near me is offering up to 38 Gen3 hybrid battery modules. These are loose, not in the carrier/holder. Seller claims they're still holding...
Hoping someone may know what is going on with my 2007 Gen 2 Prius... I recently replaced a bad cell myself, and drove the car with no issues....
I bought a remanufactured battery from Green Bean. The process was very easy. They came the next day to my residence and completed the work in...
I own a full loaded 2006 Prius purchased used one owner in 2013 at 80K , current mileage 165k. I had a new 12 volt battery installed at Toyota...
Hello all I'm new to the forum and new to the world of cars in general I have nonexistent mechanical skills/knowledge, and I recently became...
About a month ago my Gen II Prius got the dreaded 3 warning lights. A local mechanic ran diagnostics and found that Block 4 was "bad". I ordered...
Our 2007 Prius base recently had the Red Triangle pop up and stay on. AutoZone's code reader is not picking up a code for the battery. Symptoms:...
About 3 weeks ago when I was driving around the red triangle came up on the dash, along with the yellow ((!)), the vsc, check engine, and the...
Hello Hybrid Owners, I've been reading a lot of forums on hybrid battery experiences and majority didn't sound good. I created a Prius Chat...
Hello, i have prius 2011 1.8 showing me checklight after every 2-3 days. After bringing car to the local mechanic and checking by a computer they...
Hi all, I recently replaced a battery cell in the hybrid system of my '06 Prius (~ 111 k miles). When I finished the replacement and attempted...
Replacing bad cells (2, with voltages less than 7.0 volts) with decent used ones (7.6V). Once cells are aligned, cannot get front backing plate in...
