1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2011 - Dead JBL e7022. Should I replace just the digitizer or the lcd?

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Obamanomicon, Dec 28, 2019.

  1. Obamanomicon

    Obamanomicon New Member

    Joined:
    Dec 28, 2019
    2
    0
    0
    Location:
    A scary castle.
    Vehicle:
    2011 Prius
    Model:
    N/A
    So I really miss my touchscreen. My mom cleaned it a while ago and then the digitizer was dead basically. I've tried cleaning it and clean the crevices but nothing seems to help it. Think the digitizer is just toast. The screen itself is fine.

    So the specific MFD I have is a JBL e7022. I can get just the digitizer here. However I haven't seen clear directions on how to do that.

    However I'm wondering would I be better off just replacing the whole screen (screen + digitizer) since they are already assembled and about the same price? Also would this screen fit?
     
  2. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    659
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    23,072
    14,976
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Replace what?
     
  4. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,103
    4,032
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    Replace the part
     
  5. Ed Beaty

    Ed Beaty Active Member

    Joined:
    Jul 13, 2018
    334
    309
    0
    Location:
    Salt Lake City
    Vehicle:
    2010 Prius
    Model:
    IV
    Who's on first? ;)
     
  6. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,474
    38,105
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    How'd she clean it? I'm thinking sprayed it, and the spray seeped into the electronics at the bottom??

    Was there supposed to be a link? You'll need a few more posts (4 or 5?) to be able to post links. You could just type out a good search string too, in the interim.
     
  7. Obamanomicon

    Obamanomicon New Member

    Joined:
    Dec 28, 2019
    2
    0
    0
    Location:
    A scary castle.
    Vehicle:
    2011 Prius
    Model:
    N/A
    Not really sure. I think she wiped it with a wet wipe of some kind. It was a while ago.

    I'm looking at just the digitizer since the screeen seems to work just fine. Go to eBay and search "2010-11 Toyota Prius JBL E7022 Navigation Touchscreen Digitizer Stopped Working?" and you should see what I'm looking at.

    I've seen some tutorials on digitizer replacement but not for my exact model. So not sure if I can do it.
     
  8. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    23,072
    14,976
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Isn't the whole title of the thread about which part to replace?
     
  9. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,103
    4,032
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    I know. Just pouring gas onto the flame :ROFLMAO:
     
    RMB likes this.