Center console storage LED lighting

ockevin · Apr 16, 2013

I got these hatch led's and they are great and super bright.

Steve terry · Oct 19, 2015

AZGeek said: ↑

No need to remove any front dash trim, but you do have to remove the trim from around the shifter to gain access to the space below. There is actually a small hole below the shifter that was a perfect fit for the 4mm size NEOx instrument cluster LED.

Removing the OEM footwell LEDs is also pretty easy. If I remember correctly, the driver's side has a couple of screws that need to be removed in additional to releasing a plastic tab holding the panel in place. I wound up taking the OEM LED fixture apart and then using the housing as the holder for the NEO5-Bs. Again, a very good fit and you are able to snap the housing back in place to securely hold the led just as it was in the OEM installation.

Here's a pic of the disassembled OEM led showing the LED assembly removed from the housing:
Misc | PriusChat

I just shoved the NEO5-B into the housing and ran the wires out the other end. Very clean install. Getting the OEM assembly out of the housing was a small PITA but doable.
Click to expand...

I know this is old but where did you tap into for the trey light thanks

Center console storage LED lighting

ockevin Active Member

Steve terry Member

About PriusChat

Quick Navigation

Like us on Facebook

Buy us a beer!

Useful Searches

Center console storage LED lighting

ockevin Active Member

Steve terry Member