1. Attachments are working again! Check out this thread for more details and to report any other bugs.

New EV Myths and Facts Page

Discussion in 'EV (Electric Vehicle) Discussion' started by efusco, Feb 9, 2012.

  1. hill

    hill High Fiber Member

    Joined:
    Jun 23, 2005
    19,855
    8,158
    54
    Location:
    Montana & Nashville, TN
    Vehicle:
    2018 Chevy Volt
    Model:
    Premium
    Wow sage-ie's been gone that long?
    So regrettable that people with such good input go their own way.
    Probably have read some of his technical posts on a Tesla site and never made the connection.
    .
     
  2. bwilson4web

    bwilson4web BMW i3 and Model 3

    Joined:
    Nov 25, 2005
    27,372
    15,513
    0
    Location:
    Huntsville AL
    Vehicle:
    2018 Tesla Model 3
    Model:
    Prime Plus
    You run into a few former Prius owners in the EV sites.

    Bob Wilson
     
    N4HHE and hill like this.
  3. Bill Norton

    Bill Norton Senior Member

    Joined:
    Dec 15, 2012
    1,834
    601
    0
    Location:
    MONW, Ks.
    Vehicle:
    2010 Prius
    Model:
    Five
    Just to keep this Ol'thread going....
    It's Well to Wheel calculations for Gassers. Think Saudi oil tankers, military escorts, those lovely oil refineries in Houston, pipe lines and trucks to get the gas to your local QT.

    It could be Solar Panel / Windmill to Wheel for EV's. And every time you see a windmill blade or a truck full of solar panels on the highway,,, The Grid gets cleaner every day

    To see what's in the recipe of your local electricity go here: Power Profiler | US EPA

    Check it now then in 6 months!
    Here's my grid compared to the national average.
    upload_2023-7-26_8-26-28.png
     
    #63 Bill Norton, Jul 26, 2023
    Last edited: Jul 26, 2023
  4. mikefocke

    mikefocke Prius v Three 2012, Avalon 2011

    Joined:
    Nov 3, 2012
    3,692
    1,644
    0
    Location:
    Sanford, NC
    Vehicle:
    Other Hybrid
    Model:
    Limited
    If you back up on the thread, you will see that I just might have been posting stimulated by a post of July 17, 2023.

    There were hybrid wagons then, a Prius v. I owned one.
     
    bwilson4web likes this.
  5. bwilson4web

    bwilson4web BMW i3 and Model 3

    Joined:
    Nov 25, 2005
    27,372
    15,513
    0
    Location:
    Huntsville AL
    Vehicle:
    2018 Tesla Model 3
    Model:
    Prime Plus
    I rode in a Prus V taxi and was impressed. It took me from the airport to the dealer where I picked up her 2014 BMW i3-REx.

    Bob Wilson
     
  6. mikefocke

    mikefocke Prius v Three 2012, Avalon 2011

    Joined:
    Nov 3, 2012
    3,692
    1,644
    0
    Location:
    Sanford, NC
    Vehicle:
    Other Hybrid
    Model:
    Limited

    Son just sold his v after 230k miles rather than spend $6k on an ICE repair for the well known head gasket maybe diagnosis. Ah for the days when I replaced an engine for $1,100 installed in a MiniVan. And then replaced that 1k miles later when it proved to be a lemon. Fortunately free the second time.
     
    bwilson4web likes this.
  7. Salamander_King

    Salamander_King Senior Member

    Joined:
    Nov 8, 2015
    10,970
    8,853
    0
    Location:
    New England
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Must be a post by someone I am ignoring then. I don't see the comment prior to yours made this year. LOL
    In any case, the person you commented on is not like to get back to you. ;)
     
  8. douglasjre

    douglasjre Senior Member

    Joined:
    Sep 13, 2008
    1,858
    647
    0
    Location:
    Orlando, FL
    Vehicle:
    2010 Prius
    Model:
    ----USA----
    I would love to watch said news. Please share
     
  9. hill

    hill High Fiber Member

    Joined:
    Jun 23, 2005
    19,855
    8,158
    54
    Location:
    Montana & Nashville, TN
    Vehicle:
    2018 Chevy Volt
    Model:
    Premium
    Zombie thread. You are responding to a post that's about a decade old. Hyo silver hasn't been active here for about a year.
    .
     
  10. hill

    hill High Fiber Member

    Joined:
    Jun 23, 2005
    19,855
    8,158
    54
    Location:
    Montana & Nashville, TN
    Vehicle:
    2018 Chevy Volt
    Model:
    Premium
    Big fan here of conservation & well-to-wheels calc's ...but lest we forget, wind is not necessarily the giant panacea. Consider diesel Machinery tearing old wind turbine blades down, diesel machinery chopping them into ⅓'s, diesel machinery hauling them to giant landfills like this one in Casper Wyoming - among other places.
    IMG_20230812_083436.jpg

    So much for 'green' well to wheels. Yes they COULD be recycled - but .... when costs exceed benefit - it's hard to get peeps to pencil it out. This challenge even plagues much of the regular recycling industry that hauls away most of your paper, glass, plastic etc.
    https://cen.acs.org/materials/inorganic-chemistry/glass-recycling-US-broken/97/i6

    Americans' plastic recycling is dumped in landfills, investigation shows | Plastics | The Guardian
    .​
     
    #70 hill, Aug 12, 2023
    Last edited: Aug 12, 2023
  11. bwilson4web

    bwilson4web BMW i3 and Model 3

    Joined:
    Nov 25, 2005
    27,372
    15,513
    0
    Location:
    Huntsville AL
    Vehicle:
    2018 Tesla Model 3
    Model:
    Prime Plus
    A Swiss outfit has started using the blades to mount solar panels. But like worn out tires (from the diesels), recycling remains a challenge.

    Bob Wilson
     
  12. bwilson4web

    bwilson4web BMW i3 and Model 3

    Joined:
    Nov 25, 2005
    27,372
    15,513
    0
    Location:
    Huntsville AL
    Vehicle:
    2018 Tesla Model 3
    Model:
    Prime Plus
    A quick scan of the original post suggested this might have given us insights about wind turbine blades:
    Then I read the referenced article only to find it is a general article about glass recycling:

    Americans dispose of some 10 million metric tons of glass annually. Most of it ends up in the trash. Only about one-third gets recycled. That’s not because of some intrinsic materials or chemical property that makes glass difficult to recycle.
    . . .
    So much for 'green' well to wheels. Yes they
    [wind turbine blades rjw] COULD be recycled - but .... when costs exceed benefit - it's hard to get peeps to pencil it out.

    What I've noticed is posting a link without some quoted material from the source suggests ... it might be less than skilled or honest to the reader. At best, it shows an abysmal use of completely disconnect, useless, noise. At worse, it is like FOX trying to fool their audience into self-defeating opinions. It also reveals an incorrect, lazy opinion of their readers.

    Repeating myself, I am only 'green' as in 'Greenback Yankee Dollar.' So asking Mr. Google found Renewable Generation Costs in. 2021:

    The global weighted average levelised cost of electricity (LCOE) of new onshore wind projects added in 2021 fell by 15%, year‑on‑year, to USD 0.033/kWh, while that of new utility-scale solar PV fell by 13% year-on-year to USD 0.048/kWh and that of offshore wind declined 13% to USD 0.075/kWh. With only one concentrating solar power (CSP) plant commissioned in 2021, the LCOE rose 7% year-on-year to USD 0.114/kWh.
    . . .​

    To put that in context, I pay the utility company $0.12/kWh or 4x the cost of wind kWh. But what about worn out blades?

    A coal fired, power plant makes hundred of thousand tons of toxic ash and nuclear power plants make a ton or so of highly radioactive waste. Yet wind power per kWh even with burying the worn out blades is a fraction of the piles of toxic coal ash and highly radioactive, spent fuel rods and reactor components.

    No good Prius friend @hill , you need to get a clue and understand many us are not leaf looking, Bambi loving, environmental 'Karens'. Some of us are just cheap frugal folks who like to save money. But you might be genuinely interested in recycling wind turbine blades.

    Propose they be made from aluminum:
    upload_2023-8-14_3-38-1.png
    We've got thousands of tons of aluminum wings in the deserts that could be fabricated into wind turbine blades. Or pull an Elon Musk, use stainless steel:
    upload_2023-8-14_3-44-36.png
    If it is good enough to make a rocket ship, stainless steel wind turbine blades are trivial.

    Bob Wilson
     
    #72 bwilson4web, Aug 14, 2023
    Last edited: Aug 14, 2023
    Trollbait likes this.
  13. hill

    hill High Fiber Member

    Joined:
    Jun 23, 2005
    19,855
    8,158
    54
    Location:
    Montana & Nashville, TN
    Vehicle:
    2018 Chevy Volt
    Model:
    Premium
    Bob I apologize if my reference to recycle glass or plastic vs wind turbine blades was a disconnect. It was in response to the prior automotive well-to-wheels post - which, unfortunately leaves one thinking there are no such downside issues with green Tech - whether it be EV''s - solar, or recycling glass & plastic. So the referenced recycling links were merely to point out that not all of our green waste bins' contents get recycled - but instead end up in a landfill. Ie - there's a type of well-to-wheels principal on many different products we manufacture. Our last 5 vehicles have been plugins - & their primary purchase reason has been efficiency /cost savings like you. Again apologies for vague references that seem too disconnected..
    .