1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Prius Engine Codes Help

Discussion in 'Gen 2 Prius Main Forum' started by seahorse, Jan 18, 2019.

  1. seahorse

    seahorse New Member

    Joined:
    Jan 18, 2019
    2
    0
    0
    Location:
    Edison NJ
    Vehicle:
    2007 Prius
    Model:
    N/A
    Hi All,

    I am looking for advice on my car. I got a engine light on with the following codes indicating to replace the Hybrid pack. I checked the battery status using torque mobile app and found that there are two battery blocks have low charge compared to others. However these two blocks are still have 14V.

    1) Is 14V in the battery blocks too low that we need to replace them?
    2) Could it be buzz bar (orange in color) that might have gone bad?
    3) Considering the age of the car, I was thinking of going with refurbished battery pack. What do you guys suggest?

    Codes -
    P0A80 - Replace Hybrid Pack
    P3013 - Battery Block 3 becomes weak
    P3024 - Battery Block 14 becomes weak

    Thank you for your help.
     

    Attached Files:

  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,470
    8,383
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Considering the age of the car.....What age is the car? Mileage? Any mechanical issues?
     
  3. seahorse

    seahorse New Member

    Joined:
    Jan 18, 2019
    2
    0
    0
    Location:
    Edison NJ
    Vehicle:
    2007 Prius
    Model:
    N/A
    Its 2007 Toyota Prius with 120K miles. No mechanical issue.
     
  4. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    7,505
    3,772
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    If the car is in generally good conditioning and you intend to hold onto it for 3 or more years, do not bother with any kind rebuilt/refurbished/remanufactured/re-anything battery. Get either 2k1Toaster's new replacement modules or a new pack from Toyota.

    If you need to do a temporary fix to tide yourself over, consider replacing the failed modules yourself in block 3 and maybe block 14. I say maybe block 14, as they may respond to recycling/rebalancing. If you are not the DIY type and confident about messing with High Voltage, then I say pass on that. If you are going to DIY, then you will need to assemble a basic arsenal of tools and equipment.
     
    #4 dolj, Jan 19, 2019
    Last edited: Jan 19, 2019
    JC91006 likes this.