1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Prius gen 2 won't go neutral off of flatbed tow

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by newtothisprius, Jan 10, 2023.

  1. newtothisprius

    newtothisprius Junior Member

    Joined:
    May 23, 2022
    59
    12
    0
    Location:
    Florida
    Vehicle:
    2008 Prius
    Model:
    Two
    The car won't turn on. Any idea how to get this off the tow truck?
     
    #1 newtothisprius, Jan 10, 2023
  2. TMR-JWAP

    TMR-JWAP Senior Member

    Joined:
    Aug 12, 2016
    6,109
    5,819
    0
    Location:
    Columbia, SC
    Vehicle:
    2007 Prius
    Model:
    Touring
    Just did this recently with a dead 2009.
    Connect a jump pack to the underhood jump point in the fusebox.
    Immediately put the car in neutral. I left the jump pack connected and using just the brakes as needed to control speed, rolled the car right off the flatbed.

    There's no easy way to disengage the parking pawl unless you have 12v power, since it's a 12v motor on the transaxle that engages/disengages it.
     
    #2 TMR-JWAP, Jan 10, 2023
    newtothisprius likes this.
  3. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    8,263
    1,434
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    That's what I've noticed too when I put my noco genius on the 12 volt or the jump points I can always get it to neutral whether I can't start it and shift it to drive a reverse it goes to neutral If it's in neutral I'm pushing it off the flatbed or I'm dragging the car where I want it to go without incident.
     
    #3 Tombukt2, Jan 10, 2023
    newtothisprius likes this.
(You must log in or sign up to post here.)