1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Rate my system: 2015 Prius Two

Discussion in 'Gen 3 Prius Audio and Electronics' started by indiglospaz, Apr 17, 2020.

  1. indiglospaz

    indiglospaz New Member

    Joined:
    Apr 17, 2020
    3
    1
    0
    Location:
    East Coast
    Vehicle:
    2015 Prius
    Model:
    Two
    Non-JBL with Nav

    HU: Pioneer AVH-2500NEX
    Dash: JBL GTO329(25W RMSx2)
    Doors: JBL Club 9630(80W RMSx2)
    Rear: JBL Club 6520(50W RMSx2)
    Amp: JBL GTR-104(100Wx4 RMS) Class D 4-channel
    Sub: JBL GX1200(250W RMS@4ohm)
    Sub Amp: Kenwood KAC-511(300W RMS@4ohm) Class D Mono
    ^The Kenwood amp is the only blemish for it kills my OCD for uniformity, but planning on switching to JBL Club-5501 Mono

    My goal is power efficiently with big sound.

    So far I have the door and dash speakers installed with the sub and sub amp T-tapped into the rear speaker wire. Having a pro install the head unit and the 4 channel amp on Monday as well as wire up the sub properly.

    The sound is pretty decent as is, but def lacking body and full potential of power running everything off the stock head unit.
     
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,784
    48,990
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
  3. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,114
    4,040
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    You have 6 speakers minus the subwoofer but only have a 4 channel amp, dont make me rank that :LOL:
     
    ccaudio1 and bisco like this.
  4. indiglospaz

    indiglospaz New Member

    Joined:
    Apr 17, 2020
    3
    1
    0
    Location:
    East Coast
    Vehicle:
    2015 Prius
    Model:
    Two
    I'm gonna run the dash speakers from the head unit amperage.
     
    bisco likes this.
  5. indiglospaz

    indiglospaz New Member

    Joined:
    Apr 17, 2020
    3
    1
    0
    Location:
    East Coast
    Vehicle:
    2015 Prius
    Model:
    Two
    So I ended up keeping the dash and door speakers in parallel so they'd both have amplification, sounds pretty damn good.

    Question: down the line I'll probably upgrade to components in the front. But would also keep the dash 3.5s and mount the tweeters to the components on the doors. How would I go about wiring that.