You are here: PriusChat Forums


Go Back   PriusChat Forums > PriusChat Forums > PriusChat Website Questions
Connect with Facebook

This is a discussion on scantools within the PriusChat Website Questions forums, part of the PriusChat Forums category; how does a scantool enable better mpg? What brand can you suggest in reasonable price range for the novice?...


scantools

Reply
 
LinkBack Thread Tools
Old 10-19-2008, 07:02 PM   #1
donalmilligan089
Member
 
Join Date: May 2008
Location: virginia usa
Posts: 81
My Car: 2005 Prius
Model:
Package: N/A
Thanks: 1
Thanked 3 Times in 3 Posts
Friends: 0
Default scantools

how does a scantool enable better mpg? What brand can you suggest in reasonable price range for the novice?
donalmilligan089 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 10-19-2008, 07:58 PM   #2
JimboK
One owner, low mileage
 
JimboK's Avatar
 
Join Date: May 2006
Location: Chesterfield, VA
Posts: 2,553
My Car: 2005 Prius
Model:
Package: #2
Thanks: 4
Thanked 104 Times in 72 Posts
Friends: 6
Default Re: scantools

I suggest ScanGauge. Of the aftermarket devices used by PC members to monitor goings-on under the hood, that seems the most popular by far.

This is a good starting point for learning how it can be used to maximize fuel economy.
JimboK is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 10-19-2008, 09:01 PM   #3
fernelius
Junior Member
 
fernelius's Avatar
 
Join Date: Sep 2008
Location: Iowa
Posts: 16
My Car: 2009 Prius
Model:
Package: #3 Touring
Thanks: 0
Thanked 0 Times in 0 Posts
Friends: 0
Default Re: scantools

You can buy the ScanGauge II from a number of places. I bought mine with no problems from the shop that supports this site. Click the "Shop" tab at the top of pages on the PriusChat site and look for ScanGauge.
fernelius is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 10-19-2008, 09:07 PM   #4
fernelius
Junior Member
 
fernelius's Avatar
 
Join Date: Sep 2008
Location: Iowa
Posts: 16
My Car: 2009 Prius
Model:
Package: #3 Touring
Thanks: 0
Thanked 0 Times in 0 Posts
Friends: 0
Default Re: scantools

I might have more directly answered your other question. The ScanGauge keeps trip data, but I use mine primarily to monitor my current trip MPG, current MPG, traction (HV) battery current, and RPM. The ScanGauge site will give a full list of the items you can monitor on most cars. If you do a search online, you'll also find codes specific for the Prius. The SGII doesn't directly improve gas mileage but can give you a better indication of what's going on in the car so that you can improve gas mileage.

An extra bonus is the SGII will allow you to dump fault codes from the car in the event you should get one. You can then check these online to get more information on what's wrong with the car.

There are other solutions that require substantial work to install. The SGII just plugs into the diagnostic port. Takes about 10 minutes to mount it with velcro and secure the cable. Someday, I'd like to put together a more intense system that uses the MFD, but that will have to wait until a period in which I have lots of free time.
fernelius is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 10-20-2008, 10:35 AM   #5
donalmilligan089
Member
 
Join Date: May 2008
Location: virginia usa
Posts: 81
My Car: 2005 Prius
Model:
Package: N/A
Thanks: 1
Thanked 3 Times in 3 Posts
Friends: 0
Default Re: scantools

Thanks for the scan tool input. If I use a block on air intake to the radiator will scan guage 11 show temperature?
donalmilligan089 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 10-21-2008, 04:51 AM   #6
JimboK
One owner, low mileage
 
JimboK's Avatar
 
Join Date: May 2006
Location: Chesterfield, VA
Posts: 2,553
My Car: 2005 Prius
Model:
Package: #2
Thanks: 4
Thanked 104 Times in 72 Posts
Friends: 6
Default Re: scantools

Quote:
Originally Posted by donalmilligan089 View Post
Thanks for the scan tool input. If I use a block on air intake to the radiator will scan guage 11 show temperature?
It will show coolant temperature. Other temperatures (MG1, MG2, inverters, battery) are available in the CAN data stream, but I haven't seen where XGauge users have configured theirs to read any of them except battery temp. That's not an issue with grille blocking, but inverter temps are. I suggest keeping the lowermost slit of the grille unblocked until winter to help with inverter cooling.
JimboK is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Tags
scantools

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 09:37 AM.


Powered by vBulletin®
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.3.2