1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2019 Prius Prime Advanced - Front Grille Replacement

Discussion in 'Prime Main Forum (2017-2022)' started by Pedro Castillo, Jun 19, 2019.

  1. Pedro Castillo

    Pedro Castillo New Member

    Joined:
    Jun 17, 2019
    3
    3
    0
    Location:
    San Bruno, Ca
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Advanced
    Hello,

    I recently upgraded my Prius Prime Premium to a Prius Prime Advance, and I am loving it with all of the extra features you get with this package. Unfortunately, a week after I bought someone hit my front grille and put a hole in it.

    I can submit it to my insurance, but my deductible is 1000.00 more than it would cost to repair it. So I have decided to do it myself, but unfortunately, I have not found proper details instructions to go through the entire process of replacing it, the Toyota website where I bought the Grille does have instructions but after following them it appears there are more components that need to be removed such as the headlights, etc. before removing the Grille.

    Also, I have looked on YouTube videos but no luck as the only videos I was able to find where for the regular Prius, does anybody know where I can get complete instructions of what needs to be taken apart so I can proceed with the replacement?

    Thanks in advance,
     

    Attached Files:

  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    107,571
    48,862
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    welcome!

    techinfo.toyota.com
     
  3. Washingtonian

    Washingtonian Senior Member

    Joined:
    May 26, 2017
    710
    608
    0
    Location:
    Western Washington
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Advanced
    Welcome to the forum, Pedro. I have a suggestion that doesn't concern your car. You probably should change your avatar to remove your home address. Just a city and state is more than enough.
     
  4. Salamander_King

    Salamander_King Senior Member

    Joined:
    Nov 8, 2015
    10,958
    8,836
    0
    Location:
    New England
    Vehicle:
    Other Hybrid
    Model:
    N/A
  5. Pedro Castillo

    Pedro Castillo New Member

    Joined:
    Jun 17, 2019
    3
    3
    0
    Location:
    San Bruno, Ca
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Advanced
    Thank you very much for the link Salamander_king, I will have a friend translate the document for me.
     
    Salamander_King likes this.
  6. Pedro Castillo

    Pedro Castillo New Member

    Joined:
    Jun 17, 2019
    3
    3
    0
    Location:
    San Bruno, Ca
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Advanced
    Completed the job over the weekend, saved me $400 quoted by my local body shop.

    Thanks, again Salamander_king
     
    Pdxprimeguy and Salamander_King like this.
  7. Salamander_King

    Salamander_King Senior Member

    Joined:
    Nov 8, 2015
    10,958
    8,836
    0
    Location:
    New England
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Did you ended up replacing entire grill sub-assembly (part #53101 in the diagram both acrylic fascia and black grill together)? Or could you just replace the acrylic part of the grill sub-assembly (shown in the diagram below with the orange arrow)? I have a crack on the acrylic fascia just like yours, but since you can't buy just the acrylic part separately, I have not touched it yet.

    GRILLE SUB-ASSEMBLY_parts.png
     
    #7 Salamander_King, Jun 24, 2019
    Last edited: Jun 24, 2019
  8. roypaik

    roypaik Member

    Joined:
    Sep 19, 2010
    161
    39
    2
    Location:
    Orange County
    Vehicle:
    2020 Prius Prime
    Model:
    XLE
    I have the same question.

    @pedrocastillo how was the install?
     
  9. Salamander_King

    Salamander_King Senior Member

    Joined:
    Nov 8, 2015
    10,958
    8,836
    0
    Location:
    New England
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I'm afraid @Pedro Castillo is no longer here.:(
     
  10. bevhoward

    bevhoward Member

    Joined:
    Oct 25, 2019
    64
    32
    0
    Location:
    Austin, Texas
    Vehicle:
    2020 Prius Prime
    Model:
    XLE
    on my 2020 prius prime, it was necessary to remove the entire front bumper, grill, fenders etc per this video even though the video is for an older prius. Pretty sure that there is no way to replace the grill without doing so.
     
  11. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,474
    38,106
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    @jerrymildred was trying to separate the smoked transparent plastic portion but found it bonded iirc. Maybe has some tips, link.
     
    Danny13pruisc3 likes this.
  12. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,490
    14,095
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    See post #599 on this page. Jerry's Evolving Thoughts on "new-to-me" Prime Premium | Page 30 | PriusChat
     
    Mendel Leisk likes this.
  13. Chris Black

    Chris Black Junior Member

    Joined:
    Jul 25, 2020
    31
    9
    0
    Location:
    Arlington, va
    Vehicle:
    2012 Prius Plug-in
    Model:
    XLE
    I posted my own thread before I found this one. My grille too got hit by a rock and has a 'spider web' mark now. I watched a few videos about repairing acrylic in general as well as acrylic headlights in particular. I am seriously considering sanding down the the mark, putting on clear coat, and then wrapping the acrylic part in a protective clear film.

    My Wife offered to try with her acrylic clear nail polish, but I have my doubts if its up to specs for wind and rain over years...
     
  14. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    54,474
    38,106
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Can't recall if I mentioned in this thread: there's a process for repairing and stabilizing small "stars" on windshields. Novus was on name that comes to mind. Might work on plexiglass, not sure.
     
  15. Salamander_King

    Salamander_King Senior Member

    Joined:
    Nov 8, 2015
    10,958
    8,836
    0
    Location:
    New England
    Vehicle:
    Other Hybrid
    Model:
    N/A
    If you do try to repair the crack DIY, it is very important that you do take off the grille sub-assembly parts off from the car. It must be sitting flat on the workbench. Trying to repair it on the car without removing the grille will cause the liquid solvent to run down and cause more of cosmetic damages on the surface of the acrylic. I did it on my 2017 PRIME with superglue. The result was, just say, very unsatisfactory.

    I am still waiting for the WeldOn (commercial acrylic solvent) I ordered from Amazon. When I get it, I will try repairing recently purchased used (cracked) grille sub-assembly parts shown in the photo below. I will let you know how the repair goes. My plan is to repair all the cracks first with WeldOn then reinforce the cracked acrylic portion with epoxy on the back side and finally paint or wrap it in non-transparent color. I have checked with a local Line-X service center to see if it can be coated with material used for the truck bed liner. But they quoted me $200 for the job, which is too much for what I want to spend on this project. The cracks are going to happen again no matter how well it is fixed. If the surface of the clear acrylic is covered with non-transparent paint or wrap, then any future cracks are going to be much less visible thus cosmetically acceptable, I think.

    upload_2020-8-21_11-45-19.png
     
    #15 Salamander_King, Aug 21, 2020
    Last edited: Aug 21, 2020
    Chris Black and jerrymildred like this.
  16. Trollbait

    Trollbait It's a D&D thing

    Joined:
    Feb 7, 2006
    21,595
    11,220
    0
    Location:
    eastern Pennsylvania
    Vehicle:
    Other Non-Hybrid
    As I understand it, the 'glue'(I think most use an UV setting cement) is applied under pressure in order to force it into the cracks. A hole might need to be drilled to allow the glue fully in.

    Acrylic cements come in different viscosities. Liquid ones, like @Salamander_King will use, are known as wickable; capillary action pulls the cement into the crack. Such are used by DIYers for making acrylic aquariums.

    Apiece of metal screen embedded in the epoxy will give it more strength. Not knowing what type of epoxy you are using, you want a screen size that the epoxy can fully penetrate.
     
    Mendel Leisk and Salamander_King like this.
  17. Salamander_King

    Salamander_King Senior Member

    Joined:
    Nov 8, 2015
    10,958
    8,836
    0
    Location:
    New England
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I have J-B Weld Original Steel Reinforced Cold Weld as well as regular multipurpose J-B Weld ClearWeld epoxy, but also ordered J-B Weld 50139 PlasticBonder. According to J-B Weld site, the Original ColdWeld has 5050PSI tensile strength and ClearWeld has 3900PSI tensile strength whereas the PlasticBonder has 3770PSI tensile strength when cured. I may try using some wire screen if I can find suitable one in my garage or I may use old Bondo fiberglass tape I used for previous auto body repair project.

    But my feeling is that if I am going to reinforce entire back side of the acrylic panel, adding screen maybe a good idea. But I am thinking applying the epoxy only to the part that had cracks. In that case, an additional strength may not help much. If the rock hit the panel again it will just crack the part that is not strengthened. Covering entire back side of the panel may take way too much material, again that will ends up costing too much.
     
    #17 Salamander_King, Aug 21, 2020
    Last edited: Aug 21, 2020
  18. Chris Black

    Chris Black Junior Member

    Joined:
    Jul 25, 2020
    31
    9
    0
    Location:
    Arlington, va
    Vehicle:
    2012 Prius Plug-in
    Model:
    XLE
    keep us posted on the process. I will try to buff the cracks first and see if there is any difference
    But will try to remove the bumper if I need to do additional work
    Thanks
     
  19. RonanOD

    RonanOD New Member

    Joined:
    Aug 23, 2021
    2
    2
    0
    Location:
    Nova Scotia, Canada
    Vehicle:
    2018 Prius Prime
    Model:
    Upgrade
    Hi. I'm hoping to fix a tear on my front bumper for my 2018 Prius Prime. I translated the Japanese PDF above to help me with the process.
     

    Attached Files:

    pghyndman and Mendel Leisk like this.