Scan gauge to modify seatbelt beeps

Hi


Have an 2011 prius. Need help with Scangauge II to change seatbelt to a single beep on both driver and passenger.

Just got the scangauge but have no clue on using it.

After that change on beeps I want to see see mpg usage. Any step by step would be great.

Thank you

 

How do I activate xgauge?

 

Found this: thanks jdk2

But need help in order to put that set of number show do I go and do that exactly. Sorry I'm new to scangauge. Do I still need xgauge to make this happen?

Thanks


RobH said: ↑
Here's another few to try:

07 c0 3b a7 c0 Seat belt warning for both driver and passenger.
07 c0 3b a7 40 Seat belt warning for driver only.

Untested WAG:
07 c0 3b a7 00 Seat belt warning disabled?
Once again RobH comes through! These work perfectly as well! I couldn't test the passenger seat belt warning, but since 00 disabled the driver's side, I assume it's gone as well. I drove up to about 20mph and unclicked my belt. The warning light came on but no beep. I set it to C0 and tried again and sure enough, beeping.

You still get the initial beeping when you first turn on your car. Connect your seatbelt before hitting start to disable that.

Query Seat Belt Setting (stock result is C0)
TXD: 07c021a7
RXF: 046115a70000
RXD: 2808
MTH: 000100010000

Set Seat Belt Setting Disable driver and passenger
TXD: 07c03ba700 (or change last 00 to C0 for stock, 40 for passenger disable)
RXF: 047b15a70000
RXD: 2008
MTH: 000100010000