1. Attachments are working again! Check out this thread for more details and to report any other bugs.

My 2012 Prius 5 Build

Discussion in 'Gen 3 Prius Accessories and Modifications' started by Accordlayingkit, Nov 9, 2014.

  1. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    Ok so this is going to be a long first post because I've already done so much to this car that I THOUGHT I was buying for a work ride as it would save me a lot more money on gas, etc. About 13 years ago I used to be really into cars as I had a 97 4dr Honda Accord with full body kit, air cylinders and tons of extras. As you can see I've always kept the same username for all my forums as I really didn't think I would be signing up to communicate as much as I do really. Guess I got sucked in! So here we go.....

    My Accord....

    Accord1.jpg

    Accord2.jpg

    Accord3.jpg

    Accord6.jpg

    Accord4.jpg

    and my plates lol...

    Plates.jpg

    And lets jus say I was in a little too deep haha.....

    Tickets.jpg

    So enough with the past and lets get on to the present......

    In May 2014 I decided I wanted a Prius. I wont really going for top of the line but I ran across this 2012 Blizzard Pearl Prius 5. A older couple had it for about 2 years and put mainly highway miles on it. Full leather, Navi, rear back up cam, technology package and the list goes on. So I had to jump on it. I mean it was gonna save me so much $$$$$ right? (Wrong!!! WIFES voice)

    Picked up 5-10-14
    1.jpg
    2.jpg
    3.jpg
    4.jpg

    I ended up having to dealer install a 10 inch dvd system for my kids. The color matches the bisque interior as well...

    192.jpg

    193.jpg

    I ended up purchasing the side moldings from a 2006-2012 Toyota Rav4 BP which happens to be a perfect match in color. I just searched online to find the cheapest place that sold Toyota parts to get these. Also got windows tinted 20% all the way around.
    5.jpg

    I then got online and searched for some lowering springs. At the time is was the cheapest as I compared springs to coil overs ($165.00 vs $900). I Ended up getting the Tanabe Df210's from ebay. 1.3 drop in the front / 1.6 drop in the rear

    Tanabe DF210 lowering Springs 2010 Toyota Prius | eBay

    Spring install info....

    DIY: Spring Install | PriusChat

    After springs installed...

    8.jpg

    10.jpg

    After a little ride time it'll drop a little more after the springs settle.

    Next, I got on ebay a decided I wanted to find a CF shifter ball, picked this one..

    17.jpg

    After getting some longer set screws I was able to make this one work and fit nice and tight.

    Real Carbon Fiber Shift Knob Universal Fit Honda Acura Mazda Mitsubishi Nissan | eBay

    I decided I wanted to give it a more of a JDM look so I picked up some JDM "Dark Yellow" lens vinyl from below. I took my fog lights off (after I tried to do this with them on the car) to install the vinyl as it was easier than on the car because the lens are oval and not just flat. I didn't want wrinkles!

    MetroRestyling High Quality Colored Lens Vinyl Films.

    19.jpg

    Before the dark yellow vinyl on the fog lights I had changed my fog lights bulbs out to H11 30W Led CREE Bulbs and haven't had any issues what so ever. Nice and bright White before the dark yellow JDM vinyl of course!

    H11/H8/H9 LED Bulb | H11 CREE LED Fog Light Bulb

    Next I removed all the badges on the car and removed all the 2 sided tape (A few thumb blisters later). I plasti dipped all of them black and put CF vinyl behind the Toyota Logo on the rear.

    21.jpg

    20.jpg

    I then search for some wheels. Ended up getting the Klutch SL5 in Matte Black w/bronze lip. 18 inch. Offset is +40. Got some matching aluminum lug nuts to match the lip! Tires are Falken 225/40/18.

    23.jpg

    24.jpg

    22.jpg

    28.jpg

    Klutch SL5 Gallery | Klutch Republik

    After seeing some of the guys here on the forum with the LED turn signal mirrors I had to have them! Purchased on ebay from below. Very nice people to deal with!

    Toyota Prius 10 14 LED Mirror Cover Turn Signal Light Lamp White Color Painted | eBay

    35.jpg

    36.jpg

    After reading about the chassis bars that @Rude person's had made, I sent him a message and caught him at a good time as he still had a few left that I purchased from him. I also picked up the TRD rear sway bar from ebay and the Tanabe front sway bar from amazon. Went over a friend of mines house and he helped me install it all.

    Toyota Prius 2010 2014 GEN3 TRD Plus Rear Sway Bar New | eBay



    Install Instructions I went by...

    DIY: How to install Prius PLUS rear sway bar (PTR11-47010) | Balancing Act

    Tanabe USA R&D Blog | Front Sway bar for 2010+ Toyota Prius

    Rear Sway bar thoughts/info....
    Thoughts on TRD Rear Sway bar.... | PriusChat


    Some front sway bar torque spec info...

    Inexpensive front sway bar upgrade | Page 3 | PriusChat

    257.jpg

    258.jpg

    39.jpg

    42.jpg

    44.jpg

    Handling after installed all that was INSANE!!! Very fun to drive and handles like a beast! I picked up the Carmate cup holder tray in black off of ebay.

    Toyota Pruis Cup Holder Tray Genuine JDM 2010 2014 Prius Carmate Black Version | eBay

    46.jpg

    Added a wheel wall mount for my factory shoes.....Found on ebay

    Kmart.com

    47.jpg

    After all that I had been seeing some of these guys with the shark fin antennas and the rear roof spoiler(thanks @burnaj for the info on the rear roof wing) Shark Fin antenna came from the prius chat store and the roof spoiler from ebay. Excuse the fingerprints in the pics.

    Toyota Prius 3rd XW20 2004 2009 Rear Window Roof Spoiler Polyurethane Wing â—† | eBay

    Shark Fin Antenna

    Shark Fin Antenna for 2010-2015 Toyota Prius - PriusChat Shop


    48.jpg

    Installed Nokya "Yellow" bulbs in my high beams from amazon

    50.jpg

    52.jpg

    Heat shield sunshade purchased from ebay...

    Carbon Fiber hood struts purchased from ebay.

    58.jpg

    Next up I ordered Valenti Taillights from @pansontw

    Install Instructions...

    Part II: Installation and Initial Review of Valenti JDM full LED tail lamps from TWP | PriusChat

    63.jpg

    68.jpg

    Got the led flasher relay from amazon next to fix the rapid flashing of the turn signals



    66.jpg

    Got the Cusco front STB from www.vividracing.com ask fro Sean ext 226 tell him Scott Jackson sent you and he'll hook you up with the best prices!

    Install Instructions...

    http://www.cuscousainc.com/downloads/dl/file/id/131/951_540_alhd_strut_tower_bar_front_toyota_prius_prius_prius_v.pdf

    71.jpg


    zvw30 door strikers were next on my list from ebay

    Toyota Prius ZVW30 35 Door Lock Chrome Striker and Cover 2009 2014 | eBay

    72.jpg

    73.jpg

    Real CF License plate frames from ebay

    76.jpg

    77.jpg

    I decided to go with the black rear bumper protector from amazon



    79.jpg

    80.jpg

    Led flasher relay install (pain in the butt)

    Relay install info with images...
    LED turn signal question | PriusChat

    83.jpg

    84.jpg

    Carbon Fiber Cupeez I added from ebay

    Carbon Fiber Auto Accessory Car Door Handle Scratch Cover Guard Fit All 4pk USA | eBay

    87.jpg

    90.jpg

    Lexus "white" led floor board lights, I ordered 3 so I could do the glove box light as well

    Lexus Parts - Lexus Parts - Genuine OEM Lexus Auto Parts & Accessories


    91.jpg

    Plasti dipped the engine cover next.....

    93.jpg

    94.jpg

    Oil Cap from ebay...

    JDM Engine Oil Filler Tank Cap Cover Silver Toyota Lexus Scion | eBay

    96.jpg

    Illuminated White led door sills install was next

    Toyota Prius ZVW30 10 Up LED Light Door Sill Plate Stainless Steel Scuff White | eBay

    Used the Install Instructions in the second post on this link below. As my back door ones lights up as well I had to wire the back doors to there designated door switch. Thanks @sfv41901 for answering all my questions on this job!

    Illuminated Door Sill Instructions | PriusChat

    More Illuminated Door Sill Info...
    Illuminated Door Sills | PriusChat

    103.jpg

    104.jpg

    108.jpg
    107.jpg

    Engine inverter covers etc from ebay...

    Toyota Genuine JDM Prius Prius V Engine Room Cover Set 2009 Present | eBay

    110.jpg

    111.jpg

    Next on the list was Advan Carbon Fiber Duck Wing that I ordered from www.vividracing.com Sean ext 226


    Advan Carbon - The leading retailer of quality carbon fiber body kits, car body kits, rear spoilers.


    112.jpg

    114.jpg

    115.jpg

    116.jpg

    117.jpg

    118.jpg

    189.jpg

    190.jpg

    Valenti smoked led 3rd brake light thanks @pansontw

    124.jpg

    Next was the Injen Intake I purchased from ebay....

    "In Stock" Injen Short RAM Air Intake 2011 2013 Lexus CT200H Prius Black 10HP | eBay

    Install Instructions...

    http://www.juicedhybrid.com/v/vspfiles/assets/images/priuscai.pdf

    129.jpg

    Pedal Install was next...

    130.jpg

    131.jpg

    It was time to kick the rear wiper to the curb, used Rodney's instructions from the link below, so here we go....

    JDM / Japanese VIP Styling: My Prius III Build | Page 15 | PriusChat

    134.1.jpg

    132.jpg

    134.jpg

    133.jpg

    143.jpg

    135.jpg

    After a long wait of finding someone to wire up my Led turn signal mirrors I finally found someone to do it. (Thanks to @sfv41901 for your help and answering my questions)

    Used these install instructions and since I don't have the power folding part, I skipped way down to where is says "If you've purchased a 3-in-1 combo welcome winker LED kit"

    DIY: How to install JDM Prius power folding side mirrors | Balancing Act

    137.jpg

    138.jpg

    139.jpg

    140.jpg

    It was time to give these factory headlights a better look...

    152.jpg

    I decided to bake them and as I removed them from the oven and sat in my kitchen floor with a flat head screw driver to start the "pry" process I realized that this was way harder than I imagined because the sealant was cooling off way too fast and I was so ready to just go put them back in lol. Luckily my coworker had done it to his motorcycle headlight and used a heat gun. I ran the lights over his house and we used a heat gun and removed both lenses in about 45 mins.

    Very good write up for baking and blacking out the Prius headlights

    DIY: How to black-out the headlights on a 2010+ Prius | Balancing Act

    Front bumper removal instructions...

    DIY: How to remove the front bumper from a 2012 3rd gen Prius | Balancing Act

    154.jpg

    I figured while I had the front end off I would figure out which line goes to the rear washer nozzle and unhook and isolate it so it would all be done by the time I mess around in the hatch area to remove the rear nozzle.

    155.jpg

    156.jpg

    The rear line is the one with the gray plug. I unplugged it, and no you wont get a dash light for unplugging....

    157.jpg

    So I was off to lowes for my homemade "try to figure out how to keep the fluid from coming out when I unhook the hose" project and this is what I came up with.....

    158.jpg

    159.jpg

    160.jpg

    Its now "shut off" and isolated haha back to the headlights now....

    162.jpg

    163.jpg

    164.jpg

    167.jpg

    168.jpg

    170.jpg

    171.jpg

    172.jpg

    173.jpg

    174.jpg

    175.jpg

    176.jpg

    177.jpg

    179.jpg

    I figured id be a little different and spray 2 coats of lens tint(from Walmart) on the orange headlight reflectors...

    Rust-Oleum Lens Tint Spray Paint, Black - Walmart.com

    180.jpg

    Sneak peek....

    181.jpg

    182.jpg

    Finished product...

    184.jpg

    185.jpg

    186.jpg

    187.jpg

    188.jpg

    Next I moved back to the hatch area to remove the rear washer nozzle. Once I removed it, I wire tied the rear nozzle to a wire inside the hatch area incase I ever wanted to put it back in I knew where to find it.

    194.jpg

    196.jpg

    197.jpg

    All gone...
    195.jpg

    Next I covered the hole on the inside and outside with some CF vinyl I had laying around as I bought enough to do my hood but then decided after doing the Advan CF Duck Wing how could I do that to myself! lol

    198.jpg

    200.jpg

    201.jpg

    After I finished that, I uninstalled my rear roof spoiler and got all the 3m tape off the roof of the car and the spoiler and cleaned it all up and installed new 3m tape on the rear roof spoiler and reinstalled it lower overtop of where the rear nozzle was....

    203.jpg

    205.jpg

    While I had all the hatch panels off, I pulled the rear nozzle line out off the hatch boot (right side hatch boot) and folded it and wire tied it and also put a dap of epoxy on the end of it even though I isolated this from the front end earlier when I did my headlights. I just wanted to be sure I wouldnt have an issue because this line is just laying above my headliner now. I decided to do this because my rear cargo LED lights came in and I installed them then also and had a hard time trying to run the LED cargo light wires through the hatch boot on the left side. Tried using a coat hanger and other stuff but ran out of patience and just decided to go this route!

    199.jpg

    LED Rear Cargo lights came from ebay....same seller as the LED Turn Signals

    Toyota Prius ZVW30 10 Up LED Lights Rear Cargo Trunk Light Luggage Lamp | eBay

    206.jpg

    207.jpg

    208.jpg

    Colors.....

    209.jpg

    I thought I was done for a little while until that damn @Burna J posted this pic.....

    i1283.photobucket.com_albums_a547_BurnaJ_014_zps2945c809.jpg

    I was trying to get some of these made as I had no clue they even made them. Apparently I didn't look good enough! Thanks @sfv41901 & @RightOnTime for tipping him off on the fitment for the Lexus CT200H working for the Prius!

    So of course I was in!

    Toyota Prius 1.8 XW-30 (2010) Room Bar / Rear Cross Bar - Ultra Racing Product Catalog

    Toyota Prius 1.8 XW-30 (2010) Rear Strut Bar / Rear Tower Bar - Ultra Racing Product Catalog

    210.jpg

    211.jpg

    212.jpg

    214.jpg

    215.jpg

    216.jpg

    217.jpg

    Ordered an extra set of rear strut covers to cut so I can place back on with the bar cut out. Thank you very much @Burna J for all your help on this. Should be cutting them out soon!

    218.jpg

    219.jpg

    Thanks @Burna J for the excellent templates for cutting the rear cargo bar covers!

    225.jpg

    226.jpg

    227.jpg

    228.jpg

    229.jpg

    Cargobar.jpg

    231.jpg

    Recent Randoms 10-28-14

    220.jpg

    221.jpg

    222.jpg

    223.jpg

    224.jpg

    Ok, so I got 1 more BIG thing coming this week and Im taking a break for a while. At least till the weather gets nice again and not freezing!

    To be continued........wink wink

    Got some new wipers.. Trico Onyx (11-14-14)

    Screenshot_2014-11-14-13-15-18.png

    OK so the big thing is here! (11-15-14) Advan Carbon Fiber Hood I got from www.vividracing.com Sean ext 226




    Advan Carbon - The leading retailer of quality carbon fiber body kits, car body kits, rear spoilers.



    20141115_132115.jpg

    254.jpg

    20141115_133801.jpg

    20141115_142336.jpg

    20141115_142536.jpg

    20141115_160949.jpg

    20141115_160959.jpg

    20141115_161005.jpg

    20141115_161014.jpg

    20141115_161020.jpg

    20141115_161044.jpg


    I finally had some time to remove the heat shield from my factory hood. Of course all the push plugs that hold it to the hood broke when removing them!

    248.jpg

    The clips I ended up replacing the broken ones with were from Lowes and there the only ones I could find that fit into the Advan hood...

    255.jpg

    The pic below shows where I cut all 6 of them to fit nicely into Advan Hood...

    256.jpg

    Then I had to remove the washer lines which were held on by some clear plastic clips that were a pain to get out without breaking. I torn them up a bit, but they still went into the new hood well. The washer squirters were a pain to get off as well with a little prying with a flat head but they came out without breaking thankfully!

    249.jpg

    251.jpg

    250.jpg

    252.jpg

    253.jpg

    Hood1.jpg

    Put the new plates on today 11-22-14
    20141122_162157.jpg

    So I picked up these AeroJacket Carbon Fiber side diffusers from member @donut_boi who bought them brand new but never installed them. He had them for sale for a while and I kept an eye on them. After some time went by after negiation with him I decide to contact him again asking if he still had them(I was hoping he didn't honestly because I've already spent enough) but of course he still had them and I caught him before he was gonna jus put them on his ride anyways. So danget here they are! lol I'm probably gonna wait till I get some side skirts eventually once I decide on a kit to put them on.

    20141201_152023.jpg

    20141201_152057.jpg

    20141201_152050.jpg

    3/31/15 UPDATE

    So I have a few little things I've been messing around with. The first being my little custom piece for my inverter cover from my secret admirer from Long Beach! I plasti Dipped it before I installed it and I think it looks so much better and complete now.


    20150103_163828.jpg

    20150103_163844.jpg

    20150312_165739.jpg

    20150312_170730.jpg

    I got sucked into the trendy door hinge covers off eBay for like $6


    20150322_141718.jpg

    20150322_142321.jpg

    A while back I was reading some post and seen where @Xterra72 was changing out his licence plate lights to the full led lights which required taking off the hatch trim piece to switch the lights out. I got to thinking outside the box some and said dayum I bet that trim piece would look pretty sweet with no emblems and real CF and clearcoated!(Evidently @Starbrand and I think Alot alike because he did something similar recently but I didn't wanna say to much yet because I hadn't got my piece back yet)

    So I got online looking for the hatch trim piece. The dealer wanted $300 bucks so I said noway. Got on eBay and searched and found a few. The one I ended up getting from eBay, they wanted $100 obo..... offered $50 and they accepted!


    Screenshot_2015-03-12-20-48-27.png

    It had a small crack in it but I had the seller send it strait to and undisclosed location ;) where the magic happened! The crack got fixed with fiberglass and all the emblems were removed and holes were filled in and sanded.

    Screenshot_2015-02-05-20-47-07.png

    I figured heck, when I get this piece back and remove my stock one to put the new one on why not buy the full led license plate lights as well. Ended up picking up the lights of eBay for $21.99 free shipping.

    20150327_164345.jpg

    UPDATE on the hatch trim piece sanded sans emblems....

    Screenshot_2015-03-07-22-34-53.png

    So then the piece was done in real cf and clearcoated and shipped out to me! :whistle:

    20150331_093119.jpg

    20150331_093134.jpg

    20150331_093146.jpg

    Time for the install now. I took the yellow clips off that came on it and replace it with all my clips from my factory piece as the one from eBay was missing a few.

    20150331_105827.jpg

    Install was very easy...jus remove the one panel on the inside hatch that has the hatch led's in it and you can get to everything you need to get to.

    20150331_105538.jpg

    20150331_110239.jpg

    For $21.99 daaammm there bright!

    20150331_201534.jpg

    20150401_084457.jpg

    20150331_120733.jpg

    20150331_120724.jpg

    It's very different and I haven't seen it done before, but I really like it. It kinda blends in with the rear glass from a distance but looks really nice up close. It really just gives the people behind me at stop lights to say "What kinda car is that?"(n)


    UPDATE 7/6/15

    I thought it would it would be pretty cool to order a new OEM gas door from Toyota ($50.00) and have it sent off to be wrapped in Real Carbon Fiber. From the factory, the gas door had been riveted on. So I had to drill the rivets out to get the newly wrapped gas door on. It was tough finding big enough rivets to put back in but a friend of mine had a few which were a little long but after taking the sleeve off and cutting the rivets in half it was all good. I also had to use a long neck rivet tool to access the area where the rivets go. I'm very please with how it turned out.

    317.jpg

    318.jpg

    319.jpg

    301.jpg

    322.jpg

    320.jpg


    I then wanted to get rid of the chrome on the steering wheel so I taped up enough to not get the black plasti dip all over the place.

    323.jpg

    324.jpg

    325.jpg

    Finished!

    326.jpg

    Next I really wanted to find some Real Carbon Fiber steering wheel emblem inserts. I really didn't know if they existed but after searching on Bidjdm for a while, I found exactly what I was looking for ($12.50). After the fees and shipping I ended up paying around $45 bucks. They make 4 colors of Real CF that I'm aware of as seen below.

    Bidjdm: Home page - bidJDM (Type in "ZVW30 Neo) and they should come up.

    328.jpg

    327.jpg

    Picked up these steering wheel control covers in Real Carbon Fiber from AliExpress for $78 bucks shipped!

    STEERING WHEEL COVER FOR TOYOTA PRIUS ZVW30 2009 CARBON FIBER-in Steering Covers from Automobiles & Motorcycles on Aliexpress.com | Alibaba Group

    329.jpg

    Next up was something I have been wanting for a long long time!! Real Carbon Fiber ZVW30 leather steering wheel!

    330.jpg

    331.jpg

    332.jpg

    333.jpg

    334.jpg

    Next was my idea to take my center console apart and send it off to have wrapped in Real Carbon Fiber!

    After about a month.....
    336.JPG


    335.jpg

    337.jpg

    338.jpg

    340.jpg

    341.jpg

    342.jpg

    344.jpg

    345.jpg

    Went ahead and applied the steering wheel emblem inserts.......

    347.jpg

    I then ended up picking up the G's interior door armrest's and door handles from @bino thanks bro!

    348.jpg

    349.jpg

    Before.....
    350.jpg

    In Process.....

    353.jpg

    After.....
    358.jpg

    354.jpg

    356.jpg

    On the way to Myrtle Beach I passed this mansion on HWY NC 72 that to had to turn around and park in front of the gate and snap a pic! lol Thought it would look like a cool pic...

    359.jpg

    After getting back from the beach I really got anxious and wanted to take a stab at installing the steering wheel so I cut the AC on in the garage and pulled her in for the night!

    361.jpg

    Began to read the instructions for the Install of the JDM Steering Wheel found here.....

    JDM Prius Steering Wheel | PriusChat

    I used the instructions from @w202mae on page 1....very good instructions and got me through it.

    362.jpg

    365.jpg

    369.jpg

    Out with the old steering wheel column cover.....
    370.jpg


    In with the NEW....
    372.jpg

    375.jpg

    373.jpg

    376.jpg

    378.jpg

    379.jpg

    Before & After....
    380.jpg

    Recent snap from 7/5/15....
    384.jpg

    9/8/15
    Called CARiD about a month ago asking them if I could order #7 & #9 from the full Remin real CF dash kit for my steering wheel. They contacted me a few days later saying yes they could for $20 bucks. Not bad..... I'm pleased!


    20150908_111708.jpg
     
    #1 Accordlayingkit, Nov 9, 2014
    Last edited: Sep 8, 2015
  2. pansontw

    pansontw Member

    Joined:
    Oct 28, 2011
    17
    7
    0
    Location:
    Houston
    Vehicle:
    2010 Prius
    Model:
    N/A
    Time to do something to ur front :D
    [​IMG]
     
  3. reaction26

    reaction26 Junior Member

    Joined:
    Sep 27, 2007
    39
    12
    0
    Location:
    DC
    Vehicle:
    2014 Prius
    Model:
    Five
    Scott - car is looking off the hook. The latest mod was def worth it - it makes it stand out even more. Btw - I am itching to pull the trigger on the LED mirror cover turn signal and do the exact same as you did do you think your guy would be able to do it?
    Just install JDM visors and shark fin today.
     
  4. Burna J

    Burna J Knot Right Performance....

    Joined:
    Sep 18, 2012
    1,062
    3,331
    53
    Location:
    Long Beach, CA.
    Vehicle:
    2012 Prius
    Model:
    Three
    Your ride is looking sweet ! Nice and tastefully done. (y)

    Please continue.......
     
  5. Derek77

    Derek77 Member

    Joined:
    Jun 30, 2014
    57
    90
    2
    Location:
    Daly City California
    Vehicle:
    2014 Prius
    Model:
    Two
    Your Prius is tastefully modded!
     
  6. Xterra72

    Xterra72 Senior Member

    Joined:
    Oct 20, 2013
    1,361
    1,635
    0
    Vehicle:
    2013 Prius
    Model:
    Persona
    Finally have an idea what your ride looks like. Looks great. Keep a it.
     
  7. NoMoreNow

    NoMoreNow Member

    Joined:
    May 13, 2013
    167
    102
    0
    Location:
    SF Bay Area
    Vehicle:
    2013 Prius
    Model:
    Two
    Excellent mod's! Love it all the way around! (y)(y)(y)
     
  8. RichardY

    RichardY Junior Member

    Joined:
    Nov 10, 2014
    23
    14
    0
    Location:
    El Monte, CA
    Vehicle:
    2014 Prius v wagon
    Model:
    Five
    Looks awesome.
     
  9. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    Thank you guys very much! It really is all yalls fault though haha

    Well when the mirrors came in I actually put my mirrors off and took the shells off and put the led stuff all on and ran the wires and left them behind both door until I found someone to wire them. Not sure if he'd do it again as it took us some time to figure it all out. He was kinds nervous about doing it as we were both scared messing with the A pillar where the air bag was.
     
    #9 Accordlayingkit, Nov 10, 2014
    Last edited by a moderator: Nov 15, 2014
  10. pauerbach

    pauerbach Member

    Joined:
    Apr 10, 2013
    101
    34
    0
    Vehicle:
    2013 Prius
    Model:
    Five

    Whoa! Where did you get those amazing DRL replacements?
     
    Sbceezie and pansontw like this.
  11. lilandagi

    lilandagi Junior Member

    Joined:
    Jun 19, 2014
    17
    16
    0
    Location:
    Aiea, HI
    Vehicle:
    2012 Prius
    Model:
    Two
    You did a lot of nice and clean mods, very tasteful and elegant. Thanks for sharing with us.
     
    Accordlayingkit likes this.
  12. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    Thanks!
     
  13. rcs3434

    rcs3434 Member

    Joined:
    Apr 29, 2012
    56
    163
    0
    Location:
    Danbury, ct
    Vehicle:
    2010 Prius
    Model:
    V
    Lovin what you did!!!! I Sooo want to do the headlight blackout but don't have the courage to bake my headlights apart. :confused:

    Was thinkin about doing the headliner DVD player too but was afraid I would lose all visibility while it's open, is that the case? Kinda wanna do something permanent instead of the removable headrest DVD players.
     
  14. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    Thanks! I'm not the type to do extreme either jus cause I'm really not that experienced with that type of stuff... surprised I actually did it but I'm glad I did now that it's done! haha The dvd is not really n my way at all.

    Cut and installed my rear cargo area brace covers today!
     
    Xterra72 likes this.
  15. Patz75

    Patz75 Junior Member

    Joined:
    Oct 15, 2014
    5
    0
    0
    Location:
    SF Bay Area
    Vehicle:
    2015 Prius
    Model:
    Two
    now that's a sweet ride!
     
  16. ePrius

    ePrius Member

    Joined:
    Dec 2, 2009
    162
    76
    8
    Location:
    NJ
    Vehicle:
    2010 Prius
    Model:
    III
    VERY tastefully modded!
     
  17. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    Thanks!

    Installed Trico Onyx wipers and Advan Carbon Fiber Hood(Scroll to beginning of the thread)
     
    pansontw, Burna J and Xterra72 like this.
  18. RightOnTime

    RightOnTime Senior Member

    Joined:
    Sep 21, 2012
    744
    1,612
    183
    Location:
    Kidnapped in OC, CA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Can't believe i missed your thread (y)

    Keep up the good work! Its just amazing to see so much done in such a short time, Incredible!!!
     
    orenji and Accordlayingkit like this.
  19. Accordlayingkit

    Accordlayingkit Senior Member

    Joined:
    May 19, 2014
    1,616
    1,747
    377
    Location:
    Colonial Heights, Va
    Vehicle:
    2012 Prius
    Model:
    Five
    Installed new license plates today(end of first post of thread)
     
  20. Xterra72

    Xterra72 Senior Member

    Joined:
    Oct 20, 2013
    1,361
    1,635
    0
    Vehicle:
    2013 Prius
    Model:
    Persona
    Nice plates. Straight pimpin.